Flange Weld Test Plugs

Designed for fast, easy installation, simply insert the plug into the pipe to be welded, bolt the flanges together and tighten the large compression nut(s) to expand the seal. The weld area is completely isolated so there is no need to fill the entire line or vessel. Because of this, the FTP virtually eliminates your hazardous waste disposal costs. A minimal amount of water is required to run a complete test - from a few cups to a few gallons, depending on the line size. FTP's reduce cost, downtime delays, and wastewater disposal associated with conventional flange testing. You can test without line blinds, vacuum trucks or dehydration services. With reduced NDE, water usage and environmental waste, this simple test plug saves you time and money every time you use it.

A SPECIAL WORD OF CAUTION:

Pressure testing can be an extremely hazardous operation and safety precautions should be strictly adhered to. All connections, valves, flanges and other fittings should be checked for suitability to test pressure. Verify the line ID & Plug Range match. Most importantly - NEVER stand or pass in front of any test plug or other enclosure while test is in progress. If plug discharges during a test, serious injury or death could occur.